Vacuum Pump for Vacuum Chuck
When using automatic valve type multi-hole vacuum chuck table, we need to provide a negative pressure air source for the vacuum chuck. Although many European and American countries like to use a combination of air compressors and vacuum generators to provide air source for grid vacuum chuck table , but when using multi-hole vacuum chuck table, it is not recommended to use a combination of air compressors and vacuum generators. Multi-hole vacuum chuck table needs to consume a larger vacuum flow rate, and more cutting fluid volume is pumped into the vacuum chuck table. The vacuum pump is required to provide vacuum while separating the cutting fluid. We call it an automatic drainage vacuum pump. The power of this vacuum pump is lower and more energy efficient than the combination of air compressor and vacuum generator.
Automatic drainage vacuum pump
- Model: ADVP-1500
- Power: 1500W.
- Vacuum degree: -0.94bar/-0.094MPa.
- Flow rate: 260L/min.
- Vacuum degree range: 0～-0.094MPa.
- Barrel volume: 30L.
- Product weight: 39kg.
- Packing weight: 47kg.
- Dimension(L×W×H): 45×41×80cm.
- Model: ADVP-3000
- Power: 3000W.
- Vacuum degree: -0.94bar/-0.094MPa.
- Flow rate: 480L/min.
- Vacuum degree range:0～-0.094MPa.
- Barrel volume: 30L.
- Product weight: 39kg.
- Packing weight: 47kg.
- Dimension(L×W×H)：45×41×80cm.
Intelligent drainage system vacuum machine
- Model:IDVM-3000
- Voltage: 220V
- Power: 3000W.
- Vacuum flow rate:660L/min.
- Vacuum degree range:0～-0.095MPa.
- Liquid pump head：6m
- Barrel volume: 50L.
- Product weight:113kg.
- Packing weight:127kg.
- Dimension(L×W×H):68×40×102cm.
Intelligent draining system vacuum with internal dual mode pump. One pump provides a high flow of vacuum gas and the other pumps the separated liquid or cutting fluid to a higher location. The optimal use scenario is to be connected to the bottom of a large accumulation tank, replenishing the vacuum to the large accumulation tank while separating the cutting fluid from the bottom of the large tank and pumping the cutting fluid to a specialised container for collecting the cutting fluid at a higher location. The level height of the container collecting the cutting fluid can be higher than the elevation of the Intelligent Drainage System vacuum. If you have dozens of machining centres that are using vacuum fixtures, you are already pumping cutting fluid to the bulk storage tank, but are having trouble separating the cutting fluid from the bulk storage tank. Then the Intelligent Drainage System Vacuum Machine is the best choice.
